Lunelle ES70 Couleur

The Lunelle ES70 Couleur are coloured individual soft contact lenses for all spherical, toric and presbyopic refractive errors.

The colours can be applied to the following Lunelle products: Spherique, Torique Standard, Torique RX, Variation and Variation Torique RX.

Its wide range of parameters and it’s unique ES70 material allows an optimal adaptation to the eye and therefore highest wearing comfort and long wearing times.

Description

Lunelle Couleur have a highly developed, refined way of colouring. The Lunelle Couleur is manufactured from the proven ES 70 material.
The eye colour of the wearer is not changed unnaturally or strongly. The eyes “shine”. get that “certain something”.
Lunelle Couleur gives the contact lens wearer the possibility to intensify his eye colour.
The tinting of the contact lens has another positive effect: the “visibility” in the container and during handling.

The Lunelle ES 70 Couleur gives the possibility to enhance the eye colour of the wearer. The eye colour of the contact lens wearer is not changed unnaturally, but only supported in an advantageous way.

With the takeover into the colour laboratory of SwissLens, the possibilities for colouring the Lunelle Couleur has changed somewhat.
Our CE certified colour laboratory and system provides the most accurate re-colouring of the colours used by CooperVision. However, there may be small differences in the colours.
The parameter possibilities can be extended with our flexible system.

Diameters of colouring:

11.0 mm (Lunelle Standard) / NEW: 11.3 / 11.8 / 12.2 / 12.6 / 13.0 mm

Available Colours

lunelle_torique_couleur_lagon
lunelle_torique_couleur_menthe
lunelle_torique_couleur_lemon
lunelle_torique_couleur_ambre

Available Tints

Comparison of the colours between the old Lunelle colouring system and that of SwissLens

Lunelle vs SwissLens Lunelle Couleur

Additional information

Application

,

Indication

Correction type

, ,

Lens Type

Designed by

Lunelle

Lunelle logo

ES70
Couleur

Change your eye colour naturally

Lunelle Couleur has been tested intensively and for a long time using the Xenotest 450 (possible spectral range of solar radiation).
The contact lenses were stored in physiological saline solution and irradiated for 350 hours with the xenon lamp.
Comparisons between exposed and unexposed control samples showed no noticeable colour fading.

THE RESISTANCE OF COLOURS TO LIGHT

Lunelle ES70 Material, the optimal solution for eye health and safety since the '80s.

Through intensive trials and research, ES70 has been proven to be one of the safest soft lens materials available. ES70 is versatile too and can be effectively used for the correction of all types of visual defects.

Outstanding Oxygen Permeability

Material oxygen permeability is an important parameter to consider when fitting any contact lens. For soft lenses, material permeability is related to its water content. The higher the water content the lower the DK value.
However, while the ES70 material used for Lunelle lenses has a hydrophily of 70%, it simultaneously achieves a permeability (Dk) four times higher than that of HEMA and twice as high as that of a material with 55% hydrophily.
ES70 is a non-ionic material. This means Lunelle lenses are resistant to deposits. Fewer lens deposits means better visual quality, improved comfort and the optimisation of oxygen supply throughout the life of the lens.

Great Vision Throughout the Day

All Lunelle lens designs enable good mobility. This allows an excellent flow of tears between the lens and the eye and ensures optimal ocular health. This ‘pumping’ effect also contributes to a higher oxygen supply. When this is combined with ES70s high water content the metabolism of the eye remains practically unaffected, so patients can enjoy great comfort and vision all day.
Lunelle ES70 allows contact lenses to be used all lifelong. 

Lunelle Lenses - for a precise fit of all visual defects

The ES70 Material Composition

The ES70 material used for Lunelle contact lenses is composed of PMMA, which makes it robust and transparent, and PVP, which ensures a stable water content. The production of ES70 material will continuous after the take over by SwissLens. The same laboratorie will produce the row material and blank as before and exclusively availalbe for the Lunelle Products from SwissLens. The material involves the use of the most advanced techniques to obtain the stable material. The development of Essilor's polymerisation technology has proven to provide a very consistent material quality.

PRODUCTION SwissLens uses a high-tech lathing technique to achieve optimum reproducibility. Lunelle contact lenses are systematically inspected at all stages to ensure that the parameters remain the same in the dehydrated state
QUALITY GUARANTEE
The material and the contact lenses are produced in accordance with the strict rules laid down by Quality Assurance. This is an independent quality assurance service at SwissLens, which ensures consistent product quality.

SPECIFICATION

  • Percentage of hydrophily 70 %
  • DK: 35
  • Transmission in the visible area (%) 98,6
Increase DK permeability according to the method FATT at 35° C
10·11.cm'(02).cm/cm2.s.mmHg

preloader