HydroColor Pro

HydroColor Pro are custom made prosthetic contact lenses with a white opaque back surface, which is exclusively produced by SwissLens.

In our “Selection” range, the HydroColor Pro is available in 30 different colour, different iris and pupil diameter variations.

The colors are available for following Contact Lens types: Orbis, Toris, HydroMed

Our colours do not have any influence on the DK-value. It is just as high as the value of a clear contact lens.

 

Popis

Fitting advice

Important for the first order: radius and diameter of the cornea, power, pupil diameter.

Use same fitting advice to the comparing geometry. We highly recommend to use clear trial lenses first.

For additional parameters and colours, please contact our professional service.

Order of the coloured lens by giving the serial number of the trial lens and the colour number chosen from the colour sample book, pupil clear (0) or black (1) and diameter of iris and pupil. Example: 1253476, 53b-1, 12/4.2

Delivery time: approx. 3 – 5 weeks

How do I clean a HydroColor Pro?

In order to avoid damage to the colour, especially opaque fading, please use only recommended solution. The Acuacare one step-T is tested and optimally compatible.

Attention! Do not use any care system which contains EDTA.

Here you find the compatible care solutions.

Colour selection

Our colour sample book allows you to choose the matching HydroColor Pro together with your customer.

The exact colour tone, as well as the intensity of the colour are exactly documented with our own developed “colour codes”. This means the colours of your re-orders will be matching perfectly.

Colour diameter variants

ParameterVariants
Iris Diameter (mm)10.8 ¦ 11.2 ¦ 11.5 ¦ 12.0 ¦ 12.5 ¦ 12.8
Clear Pupil Diameter (mm)2.7 ¦ 3.3 ¦ 3.8 ¦ 4.2 ¦ 4.8
Black Pupil Diameter (mm)2.6 ¦ 3.2 ¦ 3.7 ¦ 4.2 ¦ 4.8 ¦ 5.2

Technical Data

Parameterfromtosteps
Total diameter13.00 mm16.00 mm0.01 mm
Base curve8.00 mm12.0 mm0.01 mm
Sphere-20.00 dpt+20.00 dpt0.01 dpt
Cylinder-0.25 dpt-4.00 dpt0.01 dpt
Axe180°
Addition+0.50 dpt+4.00 dpt0.01 dpt

Další informace

Application

,

Indication

,

Correction type

, ,

Lens Type

,

Designed by

SwissLens

How is a HydroColor Pro produced and what is the advantage?

The colour and iris structure is created by an innovative method, which uses special patterns. As a result, the structure is exactly repeatable. The hue and intensity is specified by a colour code. This ensures reorders of coloured lenses with the same result, and a better reproducibility than classical hand painted lenses.
Although the dye is fixed in the lens material (no sandwich, no paint on surface), it is independent of the lens thickness and thus independent of lens power. The DK-value for the coloured lens is the same as for a clear lens, which means: no reduction of oxygen permeability! More than 50 steps are required to manufacture a HydroColor Pro, because despite the pattern process, it’s still a “hand-coloured procedure”. The complete tinting process takes about one hour.

Annual team meeting

We are currently in annual team meeting.

Our phonecall line is currently closed, We apologize and try to do our best to come back as soon as possible. 

Customer service email : lens.order@swisslens.ch

preloader